Free Consultation w/ A/C Systems Engineer 1-800-840-6162
RetroAir/Mr Jaguar A/C Kits and Parts
ALUMINUM RADIATORS/ FANS
Unsolicited Testimony: RB (XJS- RetroAir Aluminum Radiator) "I just talked to my Mechanic- he has received the radiator and to quote him "that's one beautiful Radiator". I'm sure that it works as good as it looks"
CLICK TO ENLARGE
ALUMINUM RADIATORS
JAGUAR FANS & HEADER TANKS
CLICK TO ENLARGE
Radiator Price List Below!
These are all aluminum (No Epoxy) that are Precision Built by the "Premier" Race Car Radiator Fabricator. They are a direct replacement and need no alterations to make them fit right every time. Aluminum cools far better than Copper and will give many years of excellent service. Our radiators have 18 fins per inch and are multi-louvered for unequaled cooling. The core is Furnace Brazed and the tanks are TIG welded for maximum strength. All fittings and outlets are 6061-T6 High strength aluminum and and the finished unit is pressure tested to 32PSI. DO NOT LET THE LOW PRICE FOOL YOU- THESE ARE SUPERIOR IN QUALITY AND ARE RACE PROVEN!
WE CAN BUILD ANY RADIATOR FROM ALUMINUM IF WE HAVE THE OLD ONE OR A GOOD DIMENSIONAL DRAWING!
This is the advice fromRadiators. Com website: "Aluminum: check for Epoxy joints and corrosion. if you're looking at a used aluminum radiator, check the connections between the tank and the cores. If they are Epoxy, check them carefully for signs of degradation. Many Epoxy joints will only last 4 or 5 years" (our emphasis, not theirs)
We do not use Epoxy in our Radiators- all the cores are FURNACE_BRAZED to the tanks.
RetroAir Radiators
There are many aluminum radiator manufacturers around, and the term "quality" gets thrown around a lot. Our Radiator Manufacturer uses a completely different approach to quality. Most businesses have to compromise between quality, costs, pricing, speed and customer service. The owner runs the company with the idea that quality is everything, and every radiator will be perfect, or he will just close the doors. He has always believed that if you build the best, you only compete with yourself and will always have a market for those who demand the finest. If this thinking is used in all internal manufacturing and office processes, defects are reduced, automatically reducing manufacturing time, scrap, cost and customer service issues. To maintain this level of quality, they employ Lean Manufacturing for speed and waste reduction. This is the basis for the Toyota Production System that Toyota has used to become the standard for automotive quality. Lean Manufacturing attacks seven different types of waste, including time waste and material waste. Six Sigma Quality techniques pioneered in the aerospace industry are used to further prevent defects. Each process is analyzed scientifically for possible failures and they are prevented rather than being reworked. A Degreed Engineer and Lean Expert is on staff to monitor and constantly improve the production process using state of the art techniques like statistical process control and mistake proofing. Major processes are mapped for consistent results and failure prevention analysis. CAD design and CNC sheet metal cutting is used that can hold .005" tolerance with complete repeatability, so each radiator is exactly like the previous one and fit is perfect every time. Human processes are mapped, standardized and monitored for consistency, so personal variation is controlled and training is consistent. Metal grain is aligned during flat pattern CAD layout to insure maximum strength at bends. This uses a lot more sheet stock and is costly, but again, it is a detail that they won't compromise on and few others even consider. Machine feeds and speeds are analyzed for their effect on fit and finish, and fittings are checked on go-no go gauges. All machine processes are tightly controlled for consistency. Kanban inventory processes insure detail parts are always available while minimizing inventory costs. Furnace brazed cores insure leak free service for years and eliminates the need for epoxy, and aggressive fin counts for the application assure maximum cooling. High fin counts are more expensive, and are therefore not used widely in the industry, but our manufacturer’s racing experience has determined that it maximizes cooling capacity for the hard to cool applications. Wins in every major racing title have proven this to be a fact, not conjecture. Each core is annealed, and the tubes are welded seam, rather than brazed lock seams. The fins are multi-louvered for enhanced air turbulence to maximize heat rejection. Each weld is show car quality, with consistent bead width, dab spacing and penetration. New welders are not permitted to weld production units until their weld quality meets the highest standards. Sheet metal details are coated until the weld phase to prevent scratches, and the production work surfaces are designed to prevent dents and dings, so each unit is free of any mars in the base metal finish. Pressure testing at 32 psi insures each unit is leak free and structurally sound. The end result of all this effort and process control is a trouble-free radiator with the highest level of performance that many call "art". This obsession with quality has built a strong repeat customer base of those who need more than just an aluminum radiator- they need the best!
JAGUAR
Please Allow 2-3 weeks Lead Time!
Shipping Requires Foam Filled Oversized Box!
Buy Now Shipping Cost is based on shipping within the US only- lower 48. Email or Call for shipping rates to Hawaii, Alaska and overseas.* Please provide phone number for shipping!
'48-'54 XK120
$726.00
'48-'54 XK120 with Fan & Bracket
$994.00
'48-'54 XK120, Shaped Top Tank
$ 1190.00
'48 to '51 XK120 Fan & Bracket
$1317.00
'51- '61 Mark VII, VIII, IX
$766.00
'51-'53 C-Type
$1261.00
'54-'57 D-Type
$1357.00
'54-'57 XK140
$914.00
'54-'57 XK140 with Integral Fan & Bracket
$1179.00
'57-'61 XK150
$779.00
'57-'61 XK150 with Integral Fan & Bracket
$1038.00
'59-'67 Mark II
$756.00
'61-'67 XKE, 3.8, 4.2 S1 Standard
$646.00
'61-'67 XKE, 3.8, 4.2 S1 Standard with Integral Fan & Bracket
$913.00
'61-'67 XKE, 3.8, 4.2 S1 Automatic
$735.00
'68-'71 XKE, 4.2, S2 Standard
$690.00
'68-'71 XKE, 4.2, S2 Standard with Integral Fan & Bracket
$1018.00
'68-'71 XKE, 4.2, S2 Automatic
$785.00
'68-'71 XKE, 4.2, S2 Automatic with Integral Fan & Bracket
$1102.00
'71-'74 XKE V12, S3 Standard
$743.00
'71-'74 XKE V12, S3 Standard with Integral Fan & Bracket
$1250.00
'71-'74 XKE V12, S3 Automatic
$827.00
'71-'74 XKE V12, S3 Automatic with Integral Fan & Bracket
"Jaguar", "Porsche", "Ferrari" and "MGB" are registered Trademarks and the reference to those names by us is for descriptive purposes only. RetroAir Inc. has no affiliation with either entity and/or any of their subsidiaries.
