Our Stage 3 R134a Conversion Kit is our complete solution if you are looking to replace all of the refrigeration components of your system with all new and upgraded parts.
INCLUDED:
- Rotary Compressor & Clutch Assembly
- Compressor Mount Kit designed for the Oldsmobile V8 engines with the compressor mounted on the right (passenger) side.
- Modern high performance “Parallel Flow” condenser that installs as stock.
- Modern high performance “Parallel Flow” evaporator that installs as stock.
- Reproduction Liquid Hose
- Suction Hose (from evaporator/POA Valve outlet to compressor inlet)*
- Discharge Hose (from compressor outlet to condenser inlet)*
- Filter-Drier
- Filter-Drier Bracket Set
- Condenser Mount Bushings
- Condenser Mount Brackets
- Replacement Expansion Valve and Refrigerant Tape
- POA Update Kit
- 134a Charge Port Adapter
- O-ring/Oil Tube Kit
- Installation Instructions
BENEFITS/FEATURES:
- Affordable alternative to replacing individual parts.
- Eliminates shaft seal leak problems associated with the stock compressor.
- Simplifies conversion from the old R12 to newer 134a.
- Reduce horsepower draw.
- Reduce weight.
- Continuous duty rating of 6,000 RPM.
NOTE:
* Hoses supplied with one end open, along with the corresponding fitting and crimping instructions. Your local a/c shop can provide crimping services, or we can provide the crimping service for an additional fee. Instructions for both options will be included.
NOTE 2:
** Stock non-a/c Olds engines will have the alternator on the right-hand side of the engine, preventing the installation of the compressor. If your car has a non-a/c engine, the alternator will need to be relocated to the stock left-hand postion in order to install the compressor.